Click image to view full size image
Specification:
| Structural Form: | 2 set running together,2 layer/set |
| Quantity of vulcanized tires: | one groups of four line |
| Vulcanized tire specifications: | 10″- 14″ |
| Vulcanized tire section: | 2.5″- 3.75″ |
| Maximum mould closing force: | (oil pressure Max 21MPa) 100ton |
| Mould clsoing force: | (oil pressure16MPa) 80ton |
| Internal diameter of plate: | Φ700 |
| Space of hot plate: | 800mm |
| Mould thickness: | 110 - 150mm |
| Maximum height of green tire: | 300mm |
| Mould installation method: | Puller M20 bolt circle and 90 degree distribution |
| Pump motor power(KW):
| 7.5(mould closing motor) / 2.2(mould opening motor) |
| Plunger diameter: | Φ250mm |
| Maximum travel of plunger: | 1400mm |
| Mould closing speed: | 50mm/second (one equipment only) |
| Mould opening speed: | 23mm/second (one equipment only) |
| Curing mode: | Capsule sulfide and center pole (nitrogen) |
| Central mechanism thread: | Tr95×4Tooth/Inch |
| Central rod diameter: | Φ35mm |
| Centre rod travel: | 265mm |
| Demolding mechanism travel: | 80mm |
| Interal capsule medium: | Vapor,hot water,high-pressure wind or nitrogen |
| vapour pressure of heat plate: | Max 10kgf/cm2 |
| Pressure of hot water,high-pressure wind or nitrogen: | Max 23kgf/cm2 |
| Pressure of compressed air: | 6-8 kgf/cm2 |
| Vacuum pressure: | (self-made)-100mmHg |
| Product quality: | 6000kg |
| Overall Dimension | |
| L×W×H (mm) | 4500×1650×1870mm |
Hydraulic Tire Curing Press
